Rajesh Power Press

(+97)1 56 433 4316/1 50 221 2919

response@rajeshpowerpressindia.com

Mechanical Under Crank Shearing

Standard Equipment

  • Electrical Motor, Starter & Vee-Belts
  • Fly Wheel & Gear Guard
  • Self-Lubrication System
  • Motor Pulley
  • A Pair of Four Edge Shear Blade
  • Front Gauge
  • Back Gauge (Manual Operated)
  • Operation & Maintenance Manual Book

Optional Equipment

  • Electric Foot Switch
  • Motorized Back Gauge
  • Automatic Lubrication System
  • Squaring Gauge System
  • Stroke Counter
  • Extension Squaring ARM

Optimising Perfomance with Special Services

Discover how we're improving quality of Industries

GET IN TOUCH

Got any Questions?

Call us Today!
+91-9081888936 response@rajeshpower
pressindia.com

Mechanical Under Crank Shearing machine Frame fabricated from IS-2062 graded. Rolled steel plates. Table and cutting beam are deeply reinforced and fines machine after stress reliving. The interlocked design put the direct support to frame. Thus frames are strain free and eliminate welds at load support. Thus the accuracy of the machine is never disturbed.

Super strong bed of closed box type construction, Street relieved in a furnace, forms a rigid backbone for the shear and a solid backing for the lower knife. Dovetail slots in front of the bed are provided for front gauge. Slots on top of bed area also provided for machined pas across the bed for convenient setting of front gauge brackets any desired spacing. Depressions in the top at the bed provide ample clearance for fingers in handling sheets narrower than the bed.

Ram is also of solid steel plates, carrying the upper knife. Its minimum weight ensure lesser load on the bearings, The upper beam moves in flat heat treated steel guide plates to avoid plates to avoid deflection, for smooth running and maintain the accurate straightness of the upper knife.

Solid clamping by powerful spring loads hold down is one of the reasons for accuracy in our shears. Heavy uniform pressure is applied along the full length of the work piece, preventing slippage regardless of versions in thickness. Hold down pressure in easily adjustable for clamping soft material. Different thickness of material can be cut without future adjustment with consistently accurate and burr free results.

Made of alloy steel for positive engagement and continuous operation having three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.

Knives are manufactured strictly as per standard material of HCHCr/OHNS. Every step from designing metallurgical specifications, heat treatment, grinding and inspection is carefully controlled. The blades are standards are standardized and are easily replaced.

The Rigid and accurate construction of the back gauge provided with the machine allows consistency in the width of sheets being cut.

Single shot lubricator provides oil to all the lubrication points, when necessary. Thus, all bearing parts and guide surface etc.

Drive through V-belts on flywheel and reduction gears are made of steel, hob cut for the smooth running and longer life.

Technical Parameters

MODEL NO.RUS-1RUS-2RUS-3RUS-4RUS-5RUS-6RUS-7RUS-8RUS-9RUS-10
Machine Size1270 X 21525 X 22030X22540 X 23125 X 21270 X 41525 X 42030 X 42540 X 43125 X 4
Cutting Cap. Thick of M.S.2.02.02.02.02.04.04.04.04.04.0
Standard Front Gauge500500500500500500500500500500
Standard Rear Gauge500500500500500500500750750750
Table Height800800800800800800800800800800
Table Width425425425425425450450450450450
Blade Length1270152520302540312512701525203025403125
Blade Width50505050506363637575
Blade Thickness12121212121818181818
Stroke Per Minute60606050506060505050
Machine Length2150245029003450415023002500300035004200
Machine Width1450145014501450152515251525170017001850
Machine Height1275127513751375140013201320142514251500
Main Motor HP23557.5557.57.510
Weight Approx.1400165021003100350019502300300042005000

*All dimensions are in mm

1 +
Years Experience
10 +
Total Employees
10000 +
Total Installations