Rajesh Power Press

(+97)1 56 433 4316/1 50 221 2919

response@rajeshpowerpressindia.com

C – Frame Power Press Machine

Standard Equipment

  • Flywheel & Gear Guard
  • Oil Cups 
  • Self-Lubrication System (For 50 Ton & above)
  • Motor Pulley
  • Knock Out System (For 20 Ton & above)
  • Slide Adj. Spanner
  • A Pair of Die Clamp
  • Clutch Key (For 50 Ton & above)

Optional Equipment

  • Pneumatic Clutch With Photo Safety Curtains
  • Two Hand Operated Mechanical Device
  • Auto Lubrication System
  • Electrical Motor, Starter & V-Belt
  • Stroke Counter
  • Extra Base Plate
  • Inclinable Type
  • Anti-vibration mount

FRAME CONSTRUCTION

Mechanical C Frame Power Press machine fabricated from IS-2062 graded rolled steel plates. Frame is deeply reinforced and fines machines after stress relieving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

TABLE & SLIDE (RAM)

Table and Slide are made of high grade heavy duty cast iron and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precession press operation.

MAIN AND PINION SHAFT

Shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for smooth working, longer life and accuracy.

ROLLING KEY CLUTCH

Made of alloy steel for positive engagement and continues operation heavy three key ways. Single rolling key system is incorporated in the machine ensuring easy and efficient working of the machine.

GEARS

Gears are of steel cast or fabricated. Gear teeth are generated by precision hobbing machine.

FLYWHEEL

Properly sized flywheel is made of high grade cast iron, for storing and releasing adequate energy for the cutting operations, and properly balanced for smooth running. Lubrication: Single shot lubricator provides oil to all the lubrication points, where necessary. Thus all bearing parts and guide surface etc.

LUBRICATION SYSTEM

Single shot lubrication provides oil to all the lubrication points, where necessary, thus all bearing parts and guide surface, etc.

Mechanical C Frame Power Press machine fabricated from IS-2062 graded rolled steel plates. Frame is deeply reinforced and fines machines after stress relieving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table and Slide are made of high grade heavy duty cast iron and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precession press operation.

Shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for smooth working, longer life and accuracy.

Gears are of steel cast or fabricated. Gear teeth are generated by precision hobbing machine.

Properly sized flywheel is made of high grade cast iron, for storing and releasing adequate energy for the cutting operations, and properly balanced for smooth running. Lubrication: Single shot lubricator provides oil to all the lubrication points, where necessary. Thus all bearing parts and guide surface etc.

Single shot lubrication provides oil to all the lubrication points, where necessary, thus all bearing parts and guide surface, etc.

Well Maintained

Modern Equipments

All Expert Engineers

Power Efficient Factory

Technical Parameters

Model No. RCP-3T RCP-5T RCP-10T RCP-20T RCP-30T RCP-50T RCP-50T-HD RCP-75T RCP-100T RCP-150T RCP-200T RCP-250T
Tonnage 3 5 10 20 30 50 50 75 100 150 200 250
Crank Shaft Diameter 38 51 60 76 83 92 105 121 134 152 158 165
Stroke Length 25 25 51 76 76 90 102 115 127 152 158 165
Stroke Adjustment 6-25 6-25 6-51 13-76 13-76 13-90 13-102 13-115 13-127 13-152 13-158 13-165
Bed size 203*152 305*178 381*255 508*305 558*356 660×406 750*520 863*596 914*635 965*685 1016*736 1067*778
Distance Bed to Ram 127 153 205 280 292 356 406 483 483 495 519 544
Hole in Ram 19 25 25 32 38 38 38 45 51 57 63 63
Hole in Bed 51 63 76 83 89 127 127 152 178 191 216 229
Ffy Wheel Diameter 330 405 435 550 660 810 810 910 1016 1118 1150 1320
Motor H.P. Required 0.5 0.5 1 2 3 5 5 7.5 10 15 20 25
Length 625 940 1100 1240 1325 1575 1575 1760 1850 1970 2190 2340
Width 610 915 1070 1220 1300 1510 1510 1700 1825 1900 2050 2230
Height 1016 1370 1525 1830 1920 2420 2420 2950 3050 3200 3250 3300
Weight Approx Kgs 150 275 525 1020 1350 2750 2750 4300 5500 6600 9000 11500

* All dimensions are in mm

Mechanical C Frame Power Press machine fabricated from IS-2062 graded rolled steel plates. Frame is deeply reinforced and fines machines after stress relieving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table and Slide are made of high grade heavy duty cast iron and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precession press operation.

Shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for smooth working, longer life and accuracy.

Gears are of steel cast or fabricated. Gear teeth are generated by precision hobbing machine.

Properly sized flywheel is made of high grade cast iron, for storing and releasing adequate energy for the cutting operations, and properly balanced for smooth running. Lubrication: Single shot lubricator provides oil to all the lubrication points, where necessary. Thus all bearing parts and guide surface etc.

Single shot lubrication provides oil to all the lubrication points, where necessary, thus all bearing parts and guide surface, etc.

Optimising Perfomance with Special Services

Discover how we're improving quality of Industries

GET IN TOUCH

Got any Questions?

Call us Today!
+91-9081888936 response@rajeshpower
pressindia.com

Mechanical C Frame Power Press machine fabricated from IS-2062 graded rolled steel plates. Frame is deeply reinforced and fines machines after stress relieving. The interlocked design put the direct support to frame. This frame is strain free and eliminates welds at load supports. Thus the accuracy of the machine is never disturbed.

Table and Slide are made of high grade heavy duty cast iron and properly seasoned. They are perfectly aligned, to each other to obtain high accuracy and precession press operation.

Shaft is made of special alloy steel machined to close accuracy and fitted in bronze bushes for smooth working, longer life and accuracy.

Gears are of steel cast or fabricated. Gear teeth are generated by precision hobbing machine.

Properly sized flywheel is made of high grade cast iron, for storing and releasing adequate energy for the cutting operations, and properly balanced for smooth running. Lubrication: Single shot lubricator provides oil to all the lubrication points, where necessary. Thus all bearing parts and guide surface etc.

Single shot lubrication provides oil to all the lubrication points, where necessary, thus all bearing parts and guide surface, etc.

Technical Parameters

Model No. RCP-3T RCP-5T RCP-10T RCP-20T RCP-30T RCP-50T RCP-50T-HD RCP-75T RCP-100T RCP-150T RCP-200T RCP-250T
Tonnage 3 5 10 20 30 50 50 75 100 150 200 250
Crank Shaft Diameter 38 51 60 76 83 92 105 121 134 152 158 165
Stroke Length 25 25 51 76 76 90 102 115 127 152 158 165
Stroke Adjustment 6-25 6-25 6-51 13-76 13-76 13-90 13-102 13-115 13-127 13-152 13-158 13-165
Bed size 203*152 305*178 381*255 508*305 558*356 660×406 750*520 863*596 914*635 965*685 1016*736 1067*778
Distance Bed to Ram 127 153 205 280 292 356 406 483 483 495 519 544
Hole in Ram 19 25 25 32 38 38 38 45 51 57 63 63
Hole in Bed 51 63 76 83 89 127 127 152 178 191 216 229
Ffy Wheel Diameter 330 405 435 550 660 810 810 910 1016 1118 1150 1320
Motor H.P. Required 0.5 0.5 1 2 3 5 5 7.5 10 15 20 25
Length 625 940 1100 1240 1325 1575 1575 1760 1850 1970 2190 2340
Width 610 915 1070 1220 1300 1510 1510 1700 1825 1900 2050 2230
Height 1016 1370 1525 1830 1920 2420 2420 2950 3050 3200 3250 3300
Weight Approx Kgs 150 275 525 1020 1350 2750 2750 4300 5500 6600 9000 11500

* All dimensions are in mm

1 +
Years Experience
10 +
Total Employees
10000 +
Total Installations