Rajesh Power Press

(+97)1 56 433 4316/1 50 221 2919

5 in 1 Hydraulic Ironworker Machine

Standard Equipment

  • Variable Stroke Adjustment With Limit Switch
  • Quick Change Die Holder 3 in 1 – 50, 73 & Angle Punching
  • Hydraulic Hold-Down
  • Back Gauge
  • Die Light
  • Operating Mode (Inching/Auto)
  • Emergency Stop Switch
  • Movable Foot Switch
  • Table for Punch Station
  • Operation & Maintenance Manual Book

Optional Equipment

  • Extra Throat Depth
  • NC Gauge

Optimising Perfomance with Special Services

Discover how we're improving quality of Industries

GET IN TOUCH

Got any Questions?

Call us Today!
+91-9081888936 response@rajeshpower
pressindia.com

Standard blade sets along with the ironworker Machine

  • Punch and Die – 10 Set (Diameter between 8 mm to 20 mm)
  • Angle Cutting Blade Punching
  • Flate Bar Shearing Blade

Any one set of die:

  •  Round Bar & Squre Bar
  •  I Section Die
  •  C Section Die
  •  Customized Die

Any one set of die:

  • V-Notching Die
  • Square Notching Die

Hydraulic Ironworker Pieces

Ironworker Machine Frame is fabricated from IS-2062 graded rolled steel plates table and cutting beam deeply reinforced and fines machines after stress reliving. The interlocked design put the direct support to frame. These frames are strain free and eliminate welds at load supports. Thus the accuracy of the ironworker machine is never disturbed.

Table are made of high grade heavy duty cast iron and properly seasoned. Slide are fabricated from IS-2062 graded rollated steel plates is deeply reinforced and fines ironworker machines after stress reliving. They are perfectly aligned, to each other to obtain high accuracy and precision press operation.

The cylinder bodies are precisely made from forged steel material duly bored and fine honed or long sealing life. The piston rods are made from EN-8 material having low carbon contents. The piston rod is hard chrome platted (0.200 micron).

The compact blocks eliminate the leakage chances and also reduces the hydraulic pipes. This low noise system is placed on the rear side of ironworker machine, on the rear side of machine, on top between two side plates. Pressure relief values is provided to safe guard the system and ironworker machine from overload. This system is driven by an electric motor of reputed brand and is coupled with a pump capable if generating more than the required pressure. Pressure gauge for system pressure, back pressure and holding pressure are providing on top of oil tank for quick reference.

The electrical control panel is located on the left hand side of the hydraulic ironworker machine. It is assembled from the internationally reputed parts for consistent performance, reliability and availability, if need to be replaced. It is wire cleanly and labeled/ferruled properly as per the international practices to help easily locates any fault and replaces components conveniently.

Technical Parameters

Model No. RIW 50 RIW 60 RIW 75 RIW 90 RIW 120 RIW 150
PUNCHING
Punching Pressure 50 Ton 60 Ton 75 Ton 90 Ton 120 Ton 150 Ton
Punch Capacity (Diameter x Thickness) Material Strength Of 450 N/MM' ø 20 x 15 ø 22 x16 ø 22 x 20 ø 26 x 22 ø 26 x 26 ø 33 x 27
ø 35 x 8 ø 45 x 8 ø 50 x 9 ø 50 x 12 ø 50 x 15 ø 50 x 18
Throat Depth 175 275 310 310 310 350
Maximum Stock Length 60 100 100 100 100 100
Cycles I Min. (20mm Stroke) 30 25 / 32 20 21 21 20
Working Height Up to Die 910 910
950 950 1020
FLAT SHEARING
Flat Bar Shear 250 x 8 300 x 12 350 x 15 460 x 15 610 x 16 610 x 18
(Width x Thickness) 180 x 12 240 x 16 240 x 20 300 x 20 400 x 20 400 x 25
Blade Length 260 310 360 465 620 620
Angle Flange Trim 65 65 75 100 100 100
Working Height 800 820 920 920 950 950
ANGLE SHEARING
At 90 Shearing 80 x 80 x 8 100 x 100 x 10 130 x 130 x 13 152 x 152 x 13 152 x 152 x 15 152 x 152 x 18
At 45 Miter Shearing 50 x 50 x 6 50 x 50 x 6 65 x 65 x 8 80 x 80 x 10 80 x 80 x 10 80 x 80 x 10
Working Height 1080 1080 1150 1150 1150 1160
BAR SHEARING
Round Bar Shear (Dia.) 25 32 40 50 50 50
Square Bar Shear 25 x 25 32 x 32 38 x 38 50 x 50 50 x 50 50 x 50
Channel Shear - 100* 130* 152* 152* 180*
I Beam Shear - 100* 130* 152* 152* 180*
Working Height 1150 1150 1300 1300 1315 1315
NOTCHING
Rectangular (W x D x T) 30 x 60 x 5 50.8 x 90 x 6 50.8 x 90 x 9 50.8 x 90 x 12 63.5 x 90 x 12 63.5 x 90 x 13
Vee-Natcher (Side x Side x T) 60 x 32 x 6* 80 x 50 x 9* 90 x 90 x 8* 90 x 90 x 10* 105 x 105 x 12* 105 x 105 x 13*
Large Vee-Natcher (Side x Side x T) - - 145 x 145 x 8 145 x 145 x 10 145 x 145 x 12 145 x 145 x 13
Working Height 850 850 850 860 860 860
SPECIAL TOOLING
Single Vee Press Brake (W x T) 160 x 6 250 x 10 250 x 15 250 x 15 250 x 20 250 x 20
Multi Vee Press Brake (W x T) - 400 x 8 500 x 5 500 x 5 700 x 5 700 x 5
Angle Bending 65 x 6 76 x 8 102 x 6 102 x 8 102 x 13 102 x 13
Pipe Notching (Dia.) 114 114 114 114 114 114
OTHER
Electric Power (HP) 5 HP 5 HP 7.5 HP 10 HP 10 HP 15 HP
Net Weight (Approx.) 1800 kg 2300 kg 2600 kg 2950 kg 3400 kg 3800 kg
Machine Dimension (Approx.) (LxWxH) 1360 x 700 x 1450 1750 x 750 x 1800 1970 x 800 x 2000 2100 x 820 x 2060 2340 x 860 x 2110 2420 x 980 x 2150

*All dimensions are in mm

1 +
Years Experience
10 +
Total Employees
10000 +
Total Installations

Send a Message

Have any Query?

Download Brochure